The HP ProLiant DL120 requires a VIB package for ESX to detect the health of the HDDs configured on the E200 RAID controller.
This package is attached.
To install, you need to access the host machine via vSphere.
-Disable any running VMs
-Put host into maintenance mode
-Upload the package to the data store
-SSH to the host via PuTTY
-Authenticate
-run the following command: esxcli software vib install -d \path to data store\bundle.zip
The server will require a reboot.
Once it's back up and running, take it out of maintenance mode and enable VMs.
You can verify that the install worked correctly by viewing the status of the storage devices under the Configuration tab.